Bring your auction to collectors worldwide!
Get listed nowBy subscribing, you are agreeing to the privacy policy. Unsubscribe anytime.
Barnebys HQ
Brahegatan 10
BOX 5038
114 37 Stockholm
All auctions / Music & Musical Instruments / Pioneer, Audio-Technica - VM530EN/H Bundle Turntable...
VM530EN/H Dual Moving Magnet-element with Headshell High-end elliptical stylus, pre-mounted on a lightweight aluminum headshell (AT-HS10). The naked elliptical stylus helps reduce the effective moving mass of the vibration system while delivering an extended frequency response. Aluminum cantilever Para-toroidal coils improve generating efficiency Separation plate between left and right channels reduces electrical crosstalk Pre-mounted on a lightweight aluminum headshell (AT-HS10) for quick and easy setup Audio-Technica’s internationally patented Double MAGNET design identical in structure to the cutting tip. Instead of using a single large magnet, the two magnets are arranged in a 'V' shape. The positions of the two magnets are precisely matched to the positions of the left and right channels in the stereophonic groove walls. Consequently, the VM design provides excellent channel separation, an extended frequency range, and sublime tracking. Para-toroidal generating systemPara-toroidal coils improve generating efficiency and offer sublime linearity, since magnetic flux leakage in this continuous two-magnet circuit is low. Moreover, the cores’ permeability is optimized thanks to the use of laminated cores. Separation plate in the middle reduces crosstalk A permalloy separation plate in the middle provides effective channel separation and suppresses electrical crosstalk to below 40 dB. This is comparable to the actual crosstalk value within the grooves of the gramophone record itself. Pre-mounted on HS10 headshell VM530EN element mounted on a die-cast aluminum HS10 headshell, suitable for 4-pin turntable arms. Elliptical naked stylus Elliptical diamond stylus follows groove modulation with greater accuracy than a conical stylus, thus offering improved high-frequency and phase response while suppressing distortion.. Elements & Stylus Frequency response 20 - 25,000 Hz Channel separation 27 dB (1 kHz) Vertical tracking angle 23° Vertical Tracking Force 1.8 to 2.2 g (2.0 g standard) Stylus construction Naked round rod Recommended load impedance 47,000 Ω Coil impedance 2,700 Ω (1 kHz) Output voltage 4.0 mV (1 kHz, 5 cm/sec) Channel balance output 1.5 dB (1 kHz) Stylus shape Naked elliptical Cantilever Aluminum tube Static compliance 35 x 10-6 cm/dyn Dynamic compliance 8 x 10-6 cm/dyn (100 Hz) Mounting 1/2” RETMA Dimensions 17.3 (H) x 17.0 (W) x 28.2 (L) mm Included accessories Mounting screws 5 mm × 2 and 10 mm × 2, spacers × 2, hex nuts × 2 Recommended load capacity 100 – 200 pF Replacement stylus VMN30EN Stylus size 0.3 x 0.7 mil Type VM-type Weight 16.8 g
Estimate:£152.68
To the auctionView all items fromCatawikiorMusic & Musical Instruments
Estimate:
£152.68
OCT 8 | 3:00 PM
OCT 8 | 3:00 PM
Bring your auction to collectors worldwide!
Get listed now£30
Quest for Fire Original Motion Picture Soundtrack RCA Red Seal Promotional
£0.75
Your Own Thing Original Cast Recording Vinyl LP RCA Victor LSO-1148 1968
£0.75
OCT 17 | 10:00 PM
